Energy Saver
Energy Saver means Decreasing the amount of energy used
while achieving a similar outcome of end use. Using less energy has lots of
benefits – you can save money and help the environment. Generating energy
requires precious natural resources, for instance coal, oil or gas.
- · Money Savings – You can reduce the cost of your heating, electricity and fuel bills.
- · Lessened Impact on the Land and Healthier Environment – Lower energy usage results in decreased pollution.
Option
1: Renewable Energy Sources
Tubular
solar heating systems can be used if the outlet temperature requirement is upto
60 deg.C. If Outlet temperature is more, parabolic solar thermal solutions are
worth considering. Solar thermal solutions can produce temperature upto 400 deg.C.
if one uses thermic fluid. Nowadays, solutions are available which will
automatically source shortfall of heat energy from existing heating equipment
such as electrical heaters or boilers if solar energy is insufficient.
Option
2: Use of waste heat recovery
Many
industrial applications such as furnace, boilers emit hot exhaust gases. Heat
contained in the flue gases can be extracted using heat exchangers & in
turn will be utilised in other heating requirements. e.g. Combustion air
supplied to boiler can be preheated by boiler flue gasses, which increases
boiler efficiency.
Option
3: Use of heat pump
Mechanical
heat pump is equipment based on Thermodynamic principle. The cycle generates
heat along with cooling effect. It is evident from the experience that an air
conditioner generates cooling effect in a room & heating effect outside the
room. So, using the same principle, if one uses heat pump instead of electrical
heating in a heating process, there is a potential to 30% energy
saver. By product of heating through heat
pump is cooling, which one can use for cooling process. So, if a process
requires both, heating & cooling; then heat pump can save energy upto
whooping 70%, when compared with electrical heating.
Option
4: Geothermal heat pump
A
geothermal heat pump or ground source heat pump (GSHP) is a central heating
and/or cooling system that transfers heat to or from the ground.
It
uses the earth as a heat source (in the winter) or a heat sink (in the summer).
This design takes advantage of the moderate temperatures in the ground to boost
efficiency and reduce the operational costs of heating and cooling system sand
may be combined with solar heating. Ground source heat pump exchanges heat with
the ground. This is much more energy-efficient because underground temperatures
are more stable than air temperatures through the year.
All
Greenmagic
products are chosen on the basis of not only energy savings, but also product
quality, after sales support and reliability. You can be rest assured about the
long lasting benefits of energy saving by choosing greenmagic.
For
more information contact us:- +91 - 253 -6614302 / 6602766 / 6603022
Comments
Post a Comment